A MODERN COLOR STORY FOR AN ICONIC SILHOUETTE
The Porsche 911 Carrera 992 is one of the most recognizable sports cars ever created. Its low roofline, wide rear body and rear-engine proportions give it a visual identity that needs no introduction.
Finished in Tiffany Blue, this example presents that familiar silhouette from a more individual perspective. The soft blue-green body color brings a clean, contemporary character to the car while preserving the clarity of the original design.
To complete the transformation, the car was fitted with FACEWHEELS FW1032 custom forged wheels in White, measuring 20 × 9J at the front and 21 × 11.5J at the rear.
The result is a wheel and color combination designed as one complete composition.
TIFFANY BLUE × WHITE
The relationship between Tiffany Blue bodywork and White wheels defines the visual direction of this build.
Tiffany Blue gives the 911 a light, distinctive presence. It softens the visual weight of the body without hiding the strong rear fenders, sloping roofline or precise surface transitions that define the 992 generation.
The White finish creates a crisp contrast beneath the body. Instead of competing with the exterior color, it extends the same bright, modern theme into the wheel design.
Together, the two colors give the car a coordinated custom identity. The body remains the main visual statement, while the wheels provide the structure and definition needed to complete it.
FACEWHEELS FW1032 — DETAIL THAT REMAINS VISIBLE
The FACEWHEELS FW1032 uses an intricate mesh design built from multiple intersecting spoke lines.
Its layered geometry creates depth around the center and a strong sense of movement toward the outer rim. From a distance, the wheel reads as a clean and balanced mesh form. At closer range, the individual spoke intersections and recessed transitions become more apparent.
White is especially effective on a design of this complexity. The bright finish makes each spoke easy to distinguish and allows the full architecture of the FW1032 to remain visible against the tires and shadowed wheel wells.
The open areas between the spokes also preserve a clear view into the braking system, adding another level of mechanical detail beneath the smooth bodywork.
20 × 9J FRONT / 21 × 11.5J REAR
The staggered 20-inch front and 21-inch rear configuration follows the proportions of the Porsche 911 Carrera 992.
At the front, the 20 × 9J wheels give the car a precise and controlled stance. At the rear, the 21 × 11.5J wheels add visual width and reinforce the mass surrounding the rear axle.
This front-to-rear relationship is important to the character of the 911. The larger and wider rear fitment emphasizes the vehicle’s rear-engine architecture while keeping the overall profile balanced.
The wheels fill the arches with a deliberate scale, but the fitment does not overwhelm the body. Enough tire remains visible to keep the car’s proportions natural and performance focused.
WHITE MAKES THE MESH DESIGN CLEAR
The White finish changes subtly as light moves across the FW1032’s layered surfaces.
In direct light, the raised spokes appear bright and sharply defined. Recessed areas develop soft shadows, separating each layer of the mesh pattern and revealing the depth built into the wheel face.
In lower light, the design becomes more unified without losing its structure. This allows the wheel to maintain a clean white appearance while still showing the transitions between the center, spokes and outer rim.
Against the Tiffany Blue exterior, the effect is graphic and immediately recognizable. The wheels frame the lower half of the car in white, while the body color remains uninterrupted across the doors, fenders and rear quarters.
BUILT AROUND THE PORSCHE 911 CARRERA 992
A successful custom wheel setup depends on more than wheel diameter and width. Spoke design, brake clearance, wheel position and the relationship between the front and rear arches must work together.
For this Porsche 911 Carrera 992, the FACEWHEELS FW1032 was configured around the vehicle’s existing proportions. The mesh design adds detail to the car’s clean surfaces, while the staggered sizing supports its naturally rear-focused stance.
The Tiffany Blue and White color combination gives the build a strong identity, but the completed car still reads unmistakably as a Porsche 911.
That balance is what makes the setup feel complete: every custom element is visible, yet every element remains connected to the vehicle around it.
FORGED TO STAND APART
The FACEWHEELS FW1032 gives this Porsche 911 Carrera 992 a distinctive presence through color, proportion and detailed forged construction.
Tiffany Blue brings a fresh character to the iconic body. White reveals the full mesh architecture of the wheels. The staggered 20-inch and 21-inch fitment reinforces the performance proportions of the car.
Together, these elements create a build that is bright, balanced and unmistakably custom.
PORSCHE 911 CARRERA 992 × FACEWHEELS FW1032 20" / 21"
20 × 9J FRONT / 21 × 11.5J REAR.
TIFFANY BLUE × WHITE.
CUSTOM FORGED.
FACEWHEELS — FORGED TO STAND APART.